Accessories: Sprayers, Peel Tabs, Mesh, etc.

100% cotton. Meet ISO Class 5 (Class 100) and above Cleanroom requirements. Also excellent for water spot removal from refractors and SCT corrector plates

2 Small spray pump heads for small HDPE bottle, part no. BOTSM, or replacements for the SBKS kit

This is the same bottle as contained in the SBKS Small Sprayer Kit.
1 x 60ml (2oz) HDPE bottle
1 x cap

Replacement valve cores for the Sure Shot S8AR and S16AR sprayer.

2 spray pump heads for medium spray bottle (Bottle only part no. BOTMD)

This is the same bottle as contained in the SBKM Medium Sprayer Kit.
1 x 240ml (8oz) HDPE bottle
1 x cap

Unwaxed Dental Floss for embedding and pulling off the dry First Contact Polymer film

NEW graduated pipettes!  A 5 pack of 7ml graduated pipettes for applying First Contact Polymer to the surface without pouring or spraying. The pipettes are ~6" long (15cm).

This is the same bottle as contained in the SBKT Larger Trigger Sprayer Kit.
1 x 500ml (16oz) HDPE bottle
1 x cap

The package contains 10 foam swabs. These cleanroom-safe swabs are an excellent choice to spread polymer on small precision surfaces. The swabs are 3.5" (90cm) long with a 5/8" (16mm) tip.

The Smaller Sprayer Kit Includes:
1 x 60ml (2oz)spray bottle with cap
2 x spray heads for bottle

Replacement Nozzles for the S8AR and S16AR

The Medium Sprayer Kit Includes:
1 x 240ml (8oz) HDPE bottle with cap
2 x spray heads for bottle

Five pack of 23 ml pipettes for applying First Contact Polymer to the surface without pouring or spraying. The pipettes are ~12" long (30cm).

2 large spray pump heads for 16 oz HDPE bottle (Bottle only part no. BOTTR)

Chemically Inert Mesh: 5 - 3" x 3" squares. Perfect for embedding in polymer as it dries to provide a lifting tab. Highly recommended to remove the dry polymer film from mounted optics.

100 pack of Peel Tabs specially designed to adhere to First Contact Polymer.

These tabs are 6" x 3" and provide ample surface stick area and hand hold for large applications. Each kit contains 5 - 6 inch x 3 inch peel tabs.

The Large Sprayer Kit Includes:
1 x 500ml (16oz) bottle with cap
2 x spray heads

Unwaxed Dental Floss for embedding and pulling off the dry First Contact Polymer film

New and Improved! See Description for Water Spot Pretreatment solution used to remove water spots. Only use if needed.

Add to your Shopping Cart if you require a C of C

Quick Mask drop cloth protects the surrounding area of a surface from over-spray while using the spray formulas of First Contact Polymer.

Hand Pump sprayer for spraying First Contact Polylmer.

Perfect, simple device for pressurizing the S8AR and S16AR aluminum refillable, reusable spray bottles. Only a few pounds is necessary or advisable to spray First Contact Polymer.

New and Improved! See Description for Water Spot Pretreatment solution used to remove water spots. Only use if needed.

Cleanroom compatible Polyetherether Ketone (PEEK) Mesh. Package contains 5 - 3" x 3" sheets of precision woven mesh.

16 Oz. Capacity red powder coated sprayer.

For use with spray versions of First Contact Polymer. Recommended for optics and mirrors larger than 1 meter or a large quantity of mirrors.

A solvent resistant tape to protect from polymer intrusion.

A solvent resistant tape to protect from polymer intrusion.